易于安装及组网的RS-485通信每个模块带有8个插槽，zui多可支持128个I/O点支持多种软件，包括 windows DLL驱动程序、 OCX 驱动程序、OPC server和通用HMI/SCAPA软件驱动程序。

与易于使用的 ADAMView数据采集软件无缝整合

支持软件：studio, S/W, Inlution Fix/i-Fix, DDL, OP

Power

Power Consumption

Power Input

3 W @ 24 VDC (not including I/O modules)

Unregulated 10 ~ 30 VDC

General

MountingCertificationsDimensions (W x H x D)EnclosureConnectorsDIN-rail, wall, rack (with mountingkit)CE, FM231 x 110 x 75 mmABS+PC1 x DB9-M/DB9-F/screw terminal for RS-485 (communication), 1 x DB9-F for RS-232 (configuration), 1 x Screw-terminal for power input

Communications

Protocols

Communication

Max. Nodes

Data Format

Network Protocols

Reliability Check

Speeds (kbps)

ASCII command/response protocol, Modbus/RTU

RS-485: 1.2 km (4000 feet)

128 (in RS-485 daisy-chain network)

Asynchronous. 1 start bit, 8 data bits, 1 stop bit, no parity

Programming link: RS-232 (3-wire: TX, RX, GND), Communication: RS-485 (2-wire)

Communication error checking with checksum

1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, and 115.2

晶创越世科技（北京）有限公司主营：研祥加固全系列，研祥工控机，研祥CPCI机箱，研祥CPCI主板，研祥加固笔记本，研祥平板电脑，研祥嵌入式工控机，研祥显示器，研祥加固显示器，研祥工业显示器，三菱液晶屏，三菱阳光下可视液晶屏，三菱LED背光液晶屏，三菱宽温液晶屏，研华工控机，研华ADAM模块，研华一体化工作站，研华板卡，研华采集卡，研华便携式工控机，研祥工控机，研华嵌入式工控机，研华无风扇工控机，松下加固笔记本全系列，GETAC加固笔记本，Gcreat工控机全系列，Gcreat嵌入式无风扇工控机，Gcreat平板电脑，Gcreat一体化工作站，Gcreat工业显示器。